Pagina 1 di 2 12 UltimaUltima
Risultati da 1 a 20 di 37
  1. 44,1 kHz (16bit) L'avatar di Gibert5
    Data Registrazione
    Jun 2013
    Messaggi
    1,314
    Ringraziamenti
    356
    20th June 2013,  21:54
    1

    Exclamation RoomEq...guida al corretto settaggio!

    Condivido anche qua, la guida che feci qualche mese addietro:



    spero sia utile per qualcuno...

    Annotazioni:
    1. nel video, a livello sequenziale, prima viene caricato il file di calibrazione della scheda audio e poi viene fatto vedere come si effettua tale calibrazione...chiaramente, nel momento in cui si procede alla calibrazione, bisogna prima effettuarla e poi caricarla

    2. Relativo alla calibrazione dell'SPL, ho scritto:"cliccate su OK e in automatico RoomEQ effettuerà la calibrazione dell'SPL"
    In realtà è meglio specificare che RoomEQ non può calibrare in automatico l'SPL...ecco perchè nella fase precedente, viene detto di munirsi di fonometro in modo da regolare i monitor sino a leggere 75dB SPL (o comunque la pressione sonora desiderata).
    Fatto questo passaggio FONDAMENTALE e utilizzando la funzione "calibrate", voi direte a RoomEQ quale sarà il riferimento da prendere in considerazione.


    Risorse Utili
    Mod: @roby_pro

    Download RoomEq v.5.18 (Gen17)
    Windows: https://www.roomeqwizard.com/install...ndows_5_18.exe
    Mac: https://www.roomeqwizard.com/install...macos_5_18.dmg
    Linux: https://www.roomeqwizard.com/install..._linux_5_18.sh

    Thread sui microfoni di misurazione (comparazione ECM8000 vs Earthworks M30)

    File di Calibrazione ECM8000:
    https://mega.nz/#!4kBC0KSQ!iJ0VXbuy4...QGzwA-rtm9pako



    (preso da hometheatershack, se siete registrati link:
    http://www.hometheatershack.com/foru...oads-page.html)
    https://www.roomeqwizard.com/changehistory.html

    Grazie a @Gibert5
    Ultima modifica di roby_pro; 14th January 2017 alle 15:11


    Gibert5 è la naturale evoluzione di Gobert4.....stiamo lavorando per immettere sul mercato, Gabert6 con pieno supporto x64

  2. I seguenti 5 utenti ringraziano Gibert5 per questo utile post:

    + Show/Hide list of the thanked

    cavaliereinesistente (2nd October 2015), les2 (31st August 2017), Mr. Red (7th September 2017), roby_pro (19th November 2013), znal_lanz (20th August 2013)

  3. estiqatsi L'avatar di turbopage
    Data Registrazione
    Jun 2013
    Località
    Milano
    Messaggi
    105
    Ringraziamenti
    539
    20th June 2013,  21:56
    2

    Grazie Gob!

  4. Eroe del forum (Admin) L'avatar di lordadb
    Data Registrazione
    Jun 2013
    Località
    Roma
    Messaggi
    5,640
    Ringraziamenti
    1,654
    20th June 2013,  22:09
    3

    Grazie, sarebbe da sticky...

  5. 44,1 kHz (16bit) L'avatar di PAPEdROGA
    Data Registrazione
    Jun 2013
    Messaggi
    1,067
    Ringraziamenti
    491
    21st June 2013,  08:24
    4

    Molto ben fatto. Grazie

  6. 44,1 kHz (16bit) L'avatar di Mr. Red
    Data Registrazione
    Jun 2013
    Messaggi
    1,436
    Ringraziamenti
    236
    21st June 2013,  09:54
    5

    Grande gibbo!

  7. Admin L'avatar di roby_pro
    Data Registrazione
    Nov 2013
    Località
    Roma
    Messaggi
    1,716
    Ringraziamenti
    534
    26th April 2014,  10:58
    6

    Nuovo Aggiornamento RoomEq

    Spero di non esser off topic, oggi mi è arrivato un aggiornamento di Room Eq,condivido l'email con voi:

    REW V5.01 Beta 18 and Beta 19 have been released.

    Download Link: http://www.hometheatershack.com/foru...tml#post691229

    Beta 18 changes:
    Room sim: Added option to show anechoic response
    Room sim: Added enclosure type selection (sealed/ported)
    Room sim: Added delay and gain adjustments for each speaker/sub
    Room sim: Levels are automatically adjusted to maintain 75 dB at main listening position regardless of number of speakers/subs selected
    Room sim: Changed response graph range from 45..105 dB to 35..95 dB
    Room sim: Added a check box to indicate whether room is well sealed (if room is sealed response is boosted below lowest mode)
    Room sim: changed -3 dB defaults for subs to 30 Hz and speakers to 80 Hz
    File import can now accept .csv files
    Export measurement as text changed to export at twice smoothing factor, or 48 points per octave, or 96 points per octave for REW log spaced data
    Added support for 192k sampling for ASIO drivers
    Added support for Emotiva UMC-200 PEQ filters
    Added a View preference (off by default) to save trace colour with each measurement when it is saved
    Increased range of the t=0 offset controls on the Impulse graph to allow 100,000 samples, 100m or 1000ms
    Added a warning if the mic/meter and soundcard cal file are the same
    If 'Shift IR' is used to remove IR delay the IR Window ref time is set 0
    If the t=0 offset controls are used to shift the impulse the IR Window ref time is adjusted by the same amount
    Measurement Delay in the Info panel is no longer affected by shifting the IR, it retains the original value from the time the measurement was made
    Added an Analysis preference to set t=0 for imported impulse responses to either the impulse response peak (the default) or the first sample of the imported data
    Added support for waveFLEX DSP A8 equaliser
    Corrected miniDSP 96k equaliser setting to 5 filters to match 96k plug-ins
    Tweaked TS params peak search to avoid problems when measurement extends to Nyquist
    Modified TS params model to replace series element Rams by parallel element Lambda_es
    Added derived and simulated motional and blocked impedance traces on the Impedance graph when TS parameters have been calculated
    TS params help updated for new model
    Changed the UMM-6 volume mapping for Windows 7
    Modified colour scheme and colour handling to be useable with Windows High Contrast theme
    Bug fix: Room sim crossover filter frequencies were not properly initialised
    Bug fix: Room sim time alignments were not adjusting while dragging speakers or listening positions
    Bug fix: Room sim dimension controls did not behave correctly in locales using comma as decimal delimiter
    Bug fix: OK/Cancel buttons in impulse response export dialog disappeared when stereo was selected
    Bug fix: Graph cursor colour was not updated when switching between dark and light backgrounds
    Bug fix: altering target curve slope settings with no measurement loaded caused repeated value changes on Linux
    Bug fix: Exception if distortion graph selected when viewing an impedance measurement
    Bug fix: Filter target match boost limits were not updating to reflect limits of selected equaliser
    Bug fix: ETC smoothing was not being retained when applying octave band filters to impulse response
    Bug fix: EQ target match failed for measurements that started at 2kHz or higher
    Bug fix: Corrected SPL averaging from simple arithmetic average to log average
    Bug fix: Check levels takes account of whether input is a USB mic

    Beta 19 changes:
    Increased overall limit on total IR length from 3 seconds to 10 seconds to allow longer IRs to be captured for very reverberent spaces
    Allowed waterfall time range up to 9999 ms
    Bug fix: Estimate IR Delay feature was broken

  8. I seguenti utenti ringraziano roby_pro per questo utile post:

    + Show/Hide list of the thanked

    Hank (26th April 2014)

  9. Admin L'avatar di roby_pro
    Data Registrazione
    Nov 2013
    Località
    Roma
    Messaggi
    1,716
    Ringraziamenti
    534
    31st July 2014,  13:33
    7

    Nuove versioni Beta 20-21

    Aggiorno il Thread:
    Beta 20 changes (11th May 2014):

    • Revised the signal generator layout
    • Added dual tone signals (SMPTE, DIN, CCIF and custom) to the generator for intermodulation distortion measurements
    • Added calculation of Intermodulation Distortion percentage on RTA when a dual tone signal is playing
    • Updated the signal generator help to add information about the CEA-2010 tone burst
    • Added CEA-2010 thresholds overlay on the RTA when the CEA burst signal is playing
    • Added an Analysis preference to control how much of the IR is retained when a measurement is made, including an option to keep the entire IR
    • Upper limit of frequency axis adjusts to suit highest end frequency in measurement list or half current sample rate, whichever is higher (min is 30 kHz)
    • Rearranged spectrogram controls to reduce height they take up
    • If the View option to save trace colour with measurement is selected, changing the colour of a measurement via the button on the measurement panel will flag the measurement as not saved
    • Added the JRE version and bit depth used when capturing a measurement to the measurement file, displayed in the measurement Info window
    • On Windows systems when running under a 64-bit JRE a 64-bit ASIO dll is loaded
    • Bug fix: Frequency tracks cursor was broken for signal generator
    • Bug fix: Room simulation could fail to open if previous head position was outside current limits
    • Bug fix: Room simulation relative head position in length and width could alter when room size changed
    • Bug fix: Room simulation became unresponsive if maximum height reached when using feet and inches
    • Bug fix: Room simulation window redraw could fail when resizing window
    • Bug fix: Trace arithmetic resultIR window location could be wrong if traces A and B had different impulse response lengths
    • Bug fix: Changing sweep start frequency from 20 Hz or above to below 10 Hz caused corrupted measurements
    • Bug fix: Changing the order of measurements did not preserve their associated trace selection states
    • Bug fix: Changing the order of measurements did not update the list of measurements in the controls for the All SPL and Measured Overlay graphs

    Beta 21 changes (28th June 2014):

    • REW now requires OS X 10.7.3 or later. The OS X JRE is built in, Java does not need to be installed.
    • REW now requires JRE7 or later on Windows
    • Input and output devices, channels and volume controls can now be accessed on OS X
    • REW works at 44.1k and 48k sample rate on OS X
    • UMIK SPL readings compensate for input volume setting on OS X (UMIK must be selected as input device and Microphone as input)
    • Added keyboard shortcuts for the RTA buttons for Save (Alt+S), Reset Averaging (Alt+R) and Distortion (Alt+D)
    • Added a smoothing setting for the RTA when in Spectrum mode
    • Changed the CEA-2010 recommended RTA settings to use Spectrum with 1/12 octave smoothing
    • The CEA-2010 limits overlay is now referenced to peak SPL within 3 Hz either side of CEA centre frequency
    • Added a zero phase filtering option for the octave band filters used in RT60 and filtered IR calculations
    • If the input device is changed ask whether the current mic/meter and/or soundcard cal files should still be used
    • Bug fix: If a cal file is not found remove the reference to that file for the next startup
    • Bug fix: SPL meter minimum reading was -90 dB FS
    • Bug fix: 128k measurement sweep at 192 kHz failed to complete the measurement
    • Bug fix: Measurement names in the overlay window did not update to reflect changes to filtering applied
    • Bug fix: USB mic volume corrections were incorrect on Windows 8.1
    • Bug fix: On OS X menus were disabled immediately after making a measurement

  10. Supermod Brasilienji L'avatar di eumir
    Data Registrazione
    Jun 2013
    Località
    Salerno
    Messaggi
    2,589
    Ringraziamenti
    423
    9th November 2014,  15:24
    8

    grazie Gob, guida utilissima .... aggiornato il primo post

  11. 12th November 2014,  18:56
    9

    Grazie per il video...utilissimo..,OTTIMO LAVORO!!!

  12. Admin L'avatar di roby_pro
    Data Registrazione
    Nov 2013
    Località
    Roma
    Messaggi
    1,716
    Ringraziamenti
    534
    2nd October 2015,  18:38
    10

    REW si aggiorna alla versione 5.13

    Revision History
    V5.13 16th August 2015
    • Reverted to requesting 512M RAM on startup, can be increased by editing roomeqwizard.vmoptions in the installation directory if required
    • Added optional frequency-dependent windowing of the impulse response, with default settings in the Analysis preferences
    • Added a psychoacoustic smoothing option
    • Added an Equivalent Rectangular Bandwidth smoothing option
    • Improved the Gaussian approximations in the smoothing algorithms
    • Changed the spectrogram background colour to match other graphs
    • Added an option to normalise the spectrogram plot to the peak level at each frequency
    • Added an option to plot the peak energy arrival time curve on the spectrogram
    • If the peak of an imported impulse response is near (within 1%) of the start or end of the file, rotate the response by half its length. This allows import from packages that put negative time data in the second half of the response
    • Export measurement as text will export unsmoothed, linear spaced measurements at their native resolution. This produces very large files, for many uses it will be appropriate to apply smoothing to a measurement before exporting it, in which case it will be exported at a multiple of the smoothing octave fraction
    • Bug fix: When saving miniDSP filter settings on OS X the filename included the path
    • Bug fix: When starting up with ASIO drivers selected SPL meter calibration status could be forgotten
    • Bug fix: Cursor frequency was incorrect on room sim graph when the graph extended to 10 Hz
    • Bug fix: Graph cursor values did not update when the graph scaling changed
    • Bug fix: Air temperature spinner arrow buttons on Thiele-small parameters dialog did not change temperature
    • Bug fix: Trace arithmetic merge did not work if measurements being merged were imported responses with magnitude data only

    V5.12 29th May 2015
    • The Measure dialog now appears on top of other windows
    • The arrow keys can be used to move the graph cursor or (with Shift pressed) the graph itself in pixel increments (click on the graph first)
    • The x and y keys can be used to zoom in (with Shift pressed) or out horizontally and vertically (click on the graph first)
    • Bug fix: When starting up with ASIO drivers the SPL meter could show no audio input available under some circumstances
    • Bug fix: When making a soundcard cal measurement with loopback as timing ref selected the scope Ref Captured trace was from the previous measurement (soundcard calibration measurements do not use the timing reference input)

  13. I seguenti 2 utenti ringraziano roby_pro per questo utile post:

    + Show/Hide list of the thanked

    cavaliereinesistente (2nd October 2015), MRK_LAB (3rd October 2015)

  14. 44,1 kHz (16bit) L'avatar di MHL
    Data Registrazione
    Jan 2014
    Località
    Lucca
    Messaggi
    1,691
    Ringraziamenti
    401
    3rd October 2015,  13:39
    11

    Bella guida @Gibert5, mi era passata inosservata, l'ho vista solo adesso grazie all'up fatto da Roby-Pro
    Musica Habet Logica

  15. I seguenti utenti ringraziano MHL per questo utile post:

    + Show/Hide list of the thanked

    roby_pro (3rd October 2015)

  16. Moderator L'avatar di Edi
    Data Registrazione
    Aug 2014
    Località
    Mondovì
    Messaggi
    1,576
    Ringraziamenti
    223
    5th January 2016,  16:27
    12

    Domandona da mille punti. Perchè REW non mi fa scegliere due uscite ma solo una?

  17. Admin L'avatar di roby_pro
    Data Registrazione
    Nov 2013
    Località
    Roma
    Messaggi
    1,716
    Ringraziamenti
    534
    15th February 2016,  18:02
    13

    Nuovo Aggiornamento (aggiornati link Thread Starter)

    V5.14 19th December 2015

    • Added option to distortion graph to plot normalised to fundamental
    • Added option to distortion graph to use fundamental level at harmonic frequency instead of at excitation frequency when normalising (per Steve F. Temme "How to graph distortion measurements", 94th AES 1993)
    • Show percentage distortion figures on Y axis of distortion graph when plot is normalised and values are percent
    • Limited span of distortion data plots to 90% of Nyquist to avoid artefacts due to antialias filters
    • Removed the raw measurement trace from the distortion graph, so graph has fundamental, harmonics and THD
    • Added option to show phases of harmonics in the RTA distortion data panel
    • Added option to add harmonic distortion to the sine wave generator output with individual control of level and phase for each harmonic
    • Added ability to save all signal generator signal types to a WAV file
    • Signal generator pink and white periodic noise sequences can be limited to a selected frequency range
    • Added support for audio devices that only provide or accept mono data
    • Improved detection of USB mics on linux
    • Improved detection of port mixers on linux
    • Improved detection of UMIK-1 on Windows 8.1 and Windows 10 for English locales
    • Added workaround for generic labelling of UMIK-1 inputs when using ASIO4All
    • Added ability to save generic equaliser filter coefficients to file with selectable sample rate
    • Improved filter sorting for filters that aren't peak or modal when sorting by frequency or gain
    • When changing equaliser, keep as many useful filters as possible
    • Increase range of target level adjustment for Set Target Level to plus/minus 100 dB (from 50).
    • Allowed sweep level down to -60 dB
    • Tweaked optimiser for DSP1124, FBQ2496 etc
    • Changed SPL logger data files to not use digit grouping and have . as the decimal delimiter, regardless of locale
    • Bypass animations when deleting measurements via the keyboard shortcut
    • Changed the View preferences default trace colours behaviour so that changing them does not change the colour of existing measurements
    • Changing the colour of a trace does not change the default colours, default colours are only changed from the View preferences
    • Added a panel to the colour chooser to allow one of the default colours to be selected
    • Allow signal generator sweep start frequency down to 0 Hz (1 Hz for log sweeps) and end frequency up to half the soundcard sample rate
    • Initialise the signal generator sweep frequency and level settings according to the last measurement sweep
    • Added an extra IR windows control to apply window settings to all measurements but keep each measurement's current window reference time
    • Bug fix: SPL logger would not load more than 1000 seconds of data from files using comma as decimal delimiter
    • Bug fix: When using time of day on SPL logger times should wrap at midnight
    • Bug fix: Change file dialog directory handling to accommodate change in behaviour under OS X El Capitan
    • Bug fix: If confirmed removal of a soundcard cal file when using a USB mic the cal file was not unloaded
    • Bug fix: Predicted SPL traces were not updated when measurement offset was changed if measurement had filters
    • Bug fix: Removing several measurements in quick succession could stop further removals
    • Bug fix: Valid start frequency was being set incorrectly when smoothing was applied
    • Bug fix: overlaid data panels (e.g. distortion data on RTA) were rendered badly on OS X
    • Bug fix: When IR peak was not at zero waterfall and spectral decay had wrong start time
    • Bug fix: Corrected USB mic volume control gain mapping for Linux

  18. Admin L'avatar di roby_pro
    Data Registrazione
    Nov 2013
    Località
    Roma
    Messaggi
    1,716
    Ringraziamenti
    534
    14th January 2017,  15:08
    14

    V5.16 21st May 2016
    Added an equaliser selection for miniDSP 2x4 HD
    Ref In VU meter is enabled even if ref input is not used for current timing reference setting
    Bug fix: Input meter was not being turned on for Check Levels on measure panel
    Bug fix: Soundcard calibration measurement was not setting up sweep start and end frequency properly
    Bug fix: Playing meas sweep manually from signal generator did not set sweep start and end frequency properly
    Bug fix: Corrected signal generation on ref output when using loopback timing reference

    V5.15 8th May 2016
    • Added an acoustic timing reference option
    • Added a measurement option to wait for the timing reference signal to be detected when using an acoustic reference
    • Added a left/right output channel selector when using Java drivers, meas sweep only appears on selected channel unless using loopback, when it appears on both
    • Rearranged the input and output selectors on the Soundcard preferences panel
    • Added a "Both" option to the output channel selector when using Java drivers
    • Added output selectors on the measurement dialog
    • Added the timing reference mode and timing reference output name to the measurement Info panel
    • Added the output name to the measurement Info panel
    • Start delay is available for both SPL and impedance measurements, relocated the start delay controls below the Start Measuring button
    • Increased range of impedance Y axis to 10k
    • Rearranged the signal generator controls
    • Added output selection to the signal generator
    • Changed signal generator linear and log sweep fade in and fade out to 10 ms (fade in was 8k samples at start freq, fade out was 8k samples)
    • Made the signal generator export filenames more descriptive
    • Removed the confirmation dialog after signal WAV generated
    • Added sample rate, start freq and end freq to default filenames for sweeps saved as WAV
    • Added bit length selection to signal generator WAV export (16, 24 or 32-bit WAV files can be generated)
    • Added option to add timing reference signal when saving measurement sweep as WAV
    • When meas sweep is selected on signal generator start and end frequency spinners reflect chosen sweep start/end rather than being half/double
    • Added a cursor frequency line over the surface of the waterfall plot
    • Added a cursor frequency line over the surface of the waterfall overlay plot
    • Removed the fade to graph colour at the bottom of the spectrogram to better define the lower parts of the plot
    • Restored Violet as the bottom colour for the Rainbow spectrogram colour scheme
    • Added an equaliser setting for the Anti-Mode 2.0 Dual Core
    • Added a display of the CEA-2010 peak level on the RTA graph
    • Added next and previous 1/3rd octave frequency buttons to the CEA burst generator
    • Show CEA peak value in red if any harmonic limits are exceeded
    • Only show CEA overlay on RTA when in spectrum mode
    • Show CEA overlay on saved RTA measurements that have valid CEA data
    • Use smoothed trace as reference for CEA thresholds (was using unsmoothed previously)
    • Prevent long file names from wrapping in the measurement panel
    • Append time of day to end of each line in SPL log files
    • Added option to have SPL logger create a file in the REW logs directory for each day and log to it whenever it runs
    • Added a View preference to use 0 dBFS as the rms value of a full scale sine wave rather than -3 dBFS
    • Reduced lower freq limit of RTA for FFT lengths above 8k
    • Moved file preview generator into a separate thread to avoid delaying display of file dialog
    • Removed redundant check for 0..1 input volume range
    • Bug fix: Drop Small filters used a threshold of 1 dB instead of half the flatness target in some circumstances
    • Bug fix: Apply Windows could fail when the overlays window was being used
    • Bug fix: Loading cal file could fail when using UMIK under Linux
    • Bug fix: Controls in graph axis limits dialog could disappear under some circumstances
    • Bug fix: Var, Psy and ERB smoothing did not work on RTA spectrum trace
    • Bug fix: Spectrogram contours were not redrawn when plot range was changed
    • Bug fix: Frequency axis grid lines were not drawn on floor of waterfall when using linear frequency axis
    • Bug fix: Group Delay was not updated properly when FDW applied
    • Bug fix: Minimum Phase response was not updated when windowing was changed

  19. Admin L'avatar di roby_pro
    Data Registrazione
    Nov 2013
    Località
    Roma
    Messaggi
    1,716
    Ringraziamenti
    534
    14th January 2017,  15:09
    15

    Nuova versione 5.18

    V5.18 4th January 2017
    • Modified frequency response import interpolator to better cope with irregular frequency spacing
    • Added a speed of sound setting in the View preferences
    • Bug fix: Exception could occur with soundcards configured for 6-channel operation
    • Bug fix: Input list was not available if input device had same name as output device


    V5.17 26th December 2016
    • Added a timing reference selector on the measurement dialog
    • Append -MP to the filename of exported minimum phase impulse responses
    • Ensure peak in an exported impulse response is at 1 second if the export has only one channel
    • Added a distance units selector to the View preferences
    • Changed default replay buffer for OS X to 16k and generated a new key to reset it to 16k for existing installations
    • Modified combo box UI so that the selection list is wide enough for all items in the list rather than truncating them at the box width
    • Added THD and THD+N figures for the 20 Hz to 20 kHz span to the RTA distortion panel
    • Added command to export filter settings as text to filter tasks pane
    • Changed tool tip position for the graph trace selectors to move them right so they do not obscure the selector check box
    • Added a secondary ASIO output selector to the signal generator
    • Changed filter export to use decimal point as delimiter and remove grouping regardless of locale
    • Added a rePhase equaliser setting, 17 constant Q parametric filters
    • Added multichannel output selection capability, works on OS X (may work on Linux also) but not supported by Windows JRE
    • Added a View preference to show [FDW] in the measurement name if a frequency dependent window has been applied, preference is enabled by default
    • Disabled soundcard calibration when using a USB microphone (it is not applicable)
    • Set lower limit for capture monitor level meters to -60 dBFS (was -50)
    • Updated bundled JRE to 8u102
    • Added input inter-channel relative gain and phase figures to the VU meters panel, active when signal generator is playing a sine wave
    • Added sample rate to excitation description for impedance measurements
    • If a USB mic is selected without having a cal file with sensitivity data loaded the SPL calibration status is cleared
    • If SPL calibration is attempted with a USB mic selected that doesn't have sensitivity data ask for the mic cal file
    • Added an equaliser setting for the Rockford Fosgate 3Sixty.3
    • Added delay info to measurement notes when using loopback or acoustic timing reference
    • Added buttons on the graph to quickly switch between two preset frequency spans that are defined in the View preferences
    • Increased precision of distance readout on zoom box
    • In distortion controls the options to limit norm. to 30 dB below peak and to use harmonic frequency as ref are only enabled when plotting normalised to fundamental as otherwise they have no effect
    • Removed 10 Hz lower limit on white periodic noise
    • Added option to use 64-bit FFT processing on RTA when need to resolve below -160 dBFS, e.g. analysing 24-bit digital data paths
    • Adjusted dual tone f1 level to match the sig gen rms level setting (means clipping occurs if level is set higher than -9 dBFS for 1:1 signals or -6 dBFS for 4:1 signals)
    • Modified RT60 calculation to better cope with responses that have a large initial decay
    • Modified RT60 calculation to cope with responses that are truncated before they reach the noise floor
    • Added a secondary output selector to the measurement dialog when using ASIO drivers
    • Input High Pass filter selection on soundcard preferences was previously only applied for measurements, now applies to any use of the input data
    • If a frequency-dependent window is applied its effect is shown on the windowed IR trace, included in a windowed IR export and trace arithmetic will use the FDW impulse
    • Added a peak trace to spectrum plots
    • Added peak hold and peak decay controls to the RTA window
    • No longer clear SPL calibration status if input changes - temporary changes during startup may have been causing issues for some users
    • Bug fix: Length formatter didn't cope with negative distances when using feet and inches
    • Bug fix: Fractional sample shifts in the IR t=0 position did not update the window reference timing correctly
    • Bug fix: Target match optimiser could fail in some circumstances
    • Bug fix: Cal file loader could fail without an error message if an attempt was made to load a binary file
    • Bug fix: White PN ignored LF Limit when using Custom range
    • Bug fix: Measurements after the first would fail if the Levels panel was displayed
    • Bug fix: valid start freq for measurement was not set correctly when loading a measurement that was smoothed
    • Bug fix: Fixed scaling error on merge B to A when measurements had different SPL calibration offsets
    • Bug fix: Impedance measurements can sometimes be affected by an inter-channel timing difference, possibly related to running the card at a different rate to the REW rate. If a timing difference of 1 sample or less occurs REW compensates for it, if more than 1 sample a warning is shown.
    • Bug fix: distortion data was not generated for first measurement after startup
    • Bug fix: Graph axis selector could disappear when trying to select from dropdown on OS X
    • Bug fix: Schroeder trace on Filtered IR graph was not updated when filtering settings changed
    • Bug fix: With ASIO drivers the timing ref output selector was shown when first opening the measurement dialog even when not using a timing reference
    • Bug fix: RTA and Spectrum traces were drawn 3 dB lower than they should be when the axis was set to dBFS and the View option for "Full scale sine rms is 0 dBFS" was selected

  20. 11 kHz
    Data Registrazione
    Dec 2015
    Località
    caserta
    Messaggi
    81
    Ringraziamenti
    4
    27th August 2017,  07:41
    16

    la mia domanda sara' di una tale banalità', ma servirà' per capire come utilizzare al meglio la misurazione. e quindi , una volta fatte le misurazioni delle risposte in frequenza nella stanza, come faccio a capire come ottenere il meglio successivamente facendo trattamenti acustici? cioè' se ottengo un grafico delle risposte in frequenza, quale poi dovrebbe essere la "risposta ideale" delle frequenze nella stanza?

  21. Moderator L'avatar di Edi
    Data Registrazione
    Aug 2014
    Località
    Mondovì
    Messaggi
    1,576
    Ringraziamenti
    223
    29th August 2017,  23:55
    17

    Citazione Originariamente Scritto da andreas.inside Visualizza Messaggio
    la mia domanda sara' di una tale banalità', ma servirà' per capire come utilizzare al meglio la misurazione. e quindi , una volta fatte le misurazioni delle risposte in frequenza nella stanza, come faccio a capire come ottenere il meglio successivamente facendo trattamenti acustici? cioè' se ottengo un grafico delle risposte in frequenza, quale poi dovrebbe essere la "risposta ideale" delle frequenze nella stanza?
    In teoria una linea, all'incirca piatta e con una riverberazione che varia tra i 0,2 e i 0,3 secondi..

  22. 44,1 kHz (16bit) L'avatar di MRK_LAB
    Data Registrazione
    Dec 2014
    Località
    Valadas Occitanas
    Messaggi
    1,928
    Ringraziamenti
    445
    30th August 2017,  09:07
    18

    Citazione Originariamente Scritto da andreas.inside Visualizza Messaggio
    la mia domanda sara' di una tale banalità', ma servirà' per capire come utilizzare al meglio la misurazione. e quindi , una volta fatte le misurazioni delle risposte in frequenza nella stanza, come faccio a capire come ottenere il meglio successivamente facendo trattamenti acustici? cioè' se ottengo un grafico delle risposte in frequenza, quale poi dovrebbe essere la "risposta ideale" delle frequenze nella stanza?
    Citazione Originariamente Scritto da Edi Visualizza Messaggio
    In teoria una linea, all'incirca piatta e con una riverberazione che varia tra i 0,2 e i 0,3 secondi..
    Scusate la secchiata di ossigeno liquido sugli zebedei e non abbiatene a male (mi ci metto dentro anche io) , ma al nostro livello sono seghe mentali !
    Se nn si sa come agire data una determinata risposta (e l'esperienza di @Edi insegna) è inutile , se non a livello propedeutic-accademico tentare una qualsivoglia forma di correzione mirata.
    O meglio , curiamo "a prescindere" modali e riflessioni esagerate tramite matematica , buonsenso e BB /limp/abs vari ed eventuali ma non avventuriamoci in imprese che nn siamo in grado di gestire , si rischia di perdere tempo e soldi senza ottenere un vero guadagno significativo (se nn peggio).
    Ripeto , "al nostro livello" ovvero quello di chi sta approcciando all'argomento trattamento acustico ma nn necessita ASSOLUTAMENTE di avere un ambiente super-controllato , intendo dire che nn si è dei PRO con clienti a flusso continuo.
    D'altro canto se proprio necessita e nn si è in grado operare esistono professionisti in grado di risolvere egregiamente.

  23. Moderator L'avatar di Edi
    Data Registrazione
    Aug 2014
    Località
    Mondovì
    Messaggi
    1,576
    Ringraziamenti
    223
    30th August 2017,  11:57
    19

    Citazione Originariamente Scritto da MRK_LAB Visualizza Messaggio
    Se nn si sa come agire data una determinata risposta (e l'esperienza di @Edi insegna) è inutile , se non a livello propedeutic-accademico tentare una qualsivoglia forma di correzione mirata.
    Si, l'esperienza insegna ma io sto iniziando seriamente a pensare che i demoni si siano impadroniti delle onde stazionarie della mia sala.. e penso pure che sia la risposta più sensata

  24. 44,1 kHz (16bit) L'avatar di MRK_LAB
    Data Registrazione
    Dec 2014
    Località
    Valadas Occitanas
    Messaggi
    1,928
    Ringraziamenti
    445
    30th August 2017,  11:59
    20

    Citazione Originariamente Scritto da Edi Visualizza Messaggio
    Si, l'esperienza insegna ma io sto iniziando seriamente a pensare che i demoni si siano impadroniti delle onde stazionarie della mia sala.. e penso pure che sia la risposta più sensata
    Appunto !

Pagina 1 di 2 12 UltimaUltima

Tag per Questa Discussione